Baby Back Ribs Reynolds Wrap Recipes

Steps:

• Preheat Grill to medium. Lay 2 sheets (18"x24" each) Heavy Duty Reynolds Wrap aluminum foil on counter. Center half the ribs in a single layer on each sheet of foil.
• Combine sugar and seasonings, rub over ribs. Bring up foil sides. Double fold top and one end to seal packet.
• Pour in 1/4 cup water. Double fold remaining end, leaving room for heat circulation inside. Repeat to make two packets. Grill 45-60 minutes in covered grill.
• Remove foil, place ribs on grill. Brush ribs with your favorite barbeque sauce. Continue grilling, 10-15 minute Brushing with sauce and turning every 5 minutes.
• OVEN: Make packets as directed. Preheat oven to 320°F Place on a cookie sheet and bake for 2 hours Slice open tops of packages (watch for steam) and brush sauce on. Place back in oven for 15 minutes.

Steps:

• In a small bowl, combine the brown sugar, chipotle chile powder, salt, onion powder, garlic powder, seafood seasoning and black pepper.
• Place each slab of ribs on a piece of aluminum foil large enough to fold over and seal, then place on a baking sheet. Do not seal the ribs in the foil yet (see Cook's Note). Generously sprinkle the dry rub on both sides of the ribs. Place in the refrigerator, meat-side down and uncovered, for at least 1 hour. Preheat the oven to 300 degrees F.
• In a small bowl, combine the apple cider, apple cider vinegar, maple syrup, Worcestershire and minced garlic. Pour half the liquid over each slab and tightly seal each in the aluminum foil, crimping the edges to make a packet.
• Transfer the foil packets and baking sheet to the oven and bake until the meat is tender and starts to pull away from the bones, about 2 hours.
• Remove the sheet pan from the oven. Carefully open the aluminum packets and pour the braising liquid into a small saucepan. Bring the liquid to a simmer over medium heat until it becomes a thick and syrupy glaze, about 4 minutes.
• While the braising liquid reduces, line a baking sheet with foil and gently transfer the ribs to it. Position a rack on the top level of the oven and preheat the broiler.
• Using a pastry brush, generously brush the ribs with about half the glaze. Place the ribs under the broiler for about 1 minute. Brush with the remaining glaze and return to the broiled until charred in spots, about 1 minute more. Slice each rack between the bones into 2-rib portions and serve.

Steps:

• Combine all the ingredients for the dry rub in a small bowl and mix together well.
• Tear a large enough piece of Reynolds Wrap® Aluminum Foil to place rack of ribs on it and be able to fully cover, meat side up. Evenly coat both sides of the ribs with the dry rub, pressing it in with your hands.
• Fold up the sides of the foil to create a rim, and pour the apple juice in around the ribs. Fold the foil over the ribs and crimp it to create a tight seal. Tear off one more piece of large foil and wrap the whole thing again to ensure a tight seal.
• Place the wrapped ribs in the fridge to marinate for 2 hours.
• Preheat oven to 225 degrees F and cook ribs for about 4 hours. You should be able to easily pierce them with a fork, but they shouldn't be falling off the bone.
• Combine all the BBQ sauce ingredients in a medium saucepan and bring to a boil over medium heat. Reduce to a simmer and allow the sauce to thicken and reduce by about a third, stirring occasionally.
• Preheat grill to high heat. Cover the grill rack with Reynolds Wrap® Aluminum Foil. Place the cooked ribs meat side up on the grill and brush the top with a layer of sauce. Close grill until the sauce is mostly dried, about 5 minutes. Brush another layer of sauce on top and close grill for an additional 5 minutes. Remove ribs from grill and lightly brush with one more layer of sauce.
• Cut the ribs into individual pieces and serve with extra sauce.

Steps:

• Tear off 4 pieces of aluminum foil big enough to enclose each portion of ribs. Spray each piece of foil with vegetable cooking spray. Brush the ribs liberally with barbeque sauce and place each portion in its own piece of foil. Wrap tightly and refrigerate for at least 8 hours, or overnight.
• Preheat oven to 300 degrees F (150 degrees C).
• Bake ribs wrapped tightly in the foil at 300 degrees F (150 degrees C) for 2 1/2 hours. Remove from foil and add more sauce, if desired.

Steps:

• PREHEAT grill to medium OR oven to 450°F.
• CENTER half of ribs in single layer on each sheet of Reynolds Wrap Heavy Duty Aluminum Foil. Combine brown sugar and seasonings; rub over ribs, turning to coat evenly.
• BRING up foil sides. Double fold top and one end to seal packet. Through open end, add 1/4 cup water. Double fold remaining end, leaving room for heat circulation inside. Repeat to make two packets.
• TO GRILL: Place rib packets in covered grill and grill 45 to 60 minutes. Remove foil; place ribs on grill
• BRUSH ribs with barbecue sauce. CONTINUE GRILLING 10 to 15 minutes, brushing with sauce and turning every 5 minutes.
• TO BAKE: Place rib packets on a cookie sheet and bake in oven 45 to 60 minutes. Remove foil; place ribs on broiler pan. BRUSH ribs with barbecue sauce. BROIL 4 to 5 inches from broiler, 10 to 15 minutes, brushing with sauce and turning every 5 minutes.

Steps:

• Preheat oven to 250 degrees F (120 degrees C).
• Mix ancho chile powder, white sugar, brown sugar, salt, black pepper, cumin, dry mustard, cayenne pepper, and chipotle pepper in a small bowl until combined.
• Place ribs meat-side down on aluminum foil. Prick back of rib rack several times with a knife.
• Generously apply coating of dry rub to all sides of rib rack.
• With rib rack meat-side down, fold foil around it to create a tight seal. Transfer to sheet pan.
• Bake in preheated oven until tender and cooked through, about 2 hours. Remove and cool 15 minutes.
• Increase oven temperature to 350 degrees F (175 degrees C).
• Open foil, drain and discard any accumulated juices and fat. Brush barbeque sauce on all sides of rack.
• Place rack meat-side up and return to oven, leaving foil open. Bake for 10 minutes, remove from oven, and brush another layer of barbeque sauce on meat-side only. Repeat baking and brushing with sauce 4 more times, for a total of 50 minutes baking time.
• Cut rack into individual rib segments and serve with more barbeque sauce.

Steps:

• Preheat a gas grill for high heat, or arrange charcoal briquettes on one side of the barbeque. Lightly oil the grate.
• In a small jar, combine cumin, chili powder, paprika, salt, and pepper. Close the lid, and shake to mix.
• Trim the membrane sheath from the back of each rack. Run a small, sharp knife between the membrane and each rib, and snip off the membrane as much as possible. Sprinkle as much of the rub onto both sides of the ribs as desired. To prevent the ribs from becoming too dark and spicy, do not thoroughly rub the spices into the ribs. Store the unused portion of the spice mix for future use.
• Place aluminum foil on lower rack to capture drippings and prevent flare-ups. Lay the ribs on the top rack of the grill (away from the coals, if you're using briquettes). Reduce gas heat to low, close lid, and leave undisturbed for 1 hour. Do not lift the lid at all.
• Brush ribs with barbecue sauce, and grill an additional 5 minutes. Serve ribs as whole rack, or cut between each rib bone and pile individually on a platter.